An excellent new grout from BAL, part of the Micromax 3 Eco range, this grout has been designed to be rapid-setting, rapid-hardening and highly flexible. For use on walls and floors, both indoors and out. This grout will be fine in dry or wet locations and has frost resistance down to -15°C . It is suitable for projects with joints from 1mm to 30mm wide. You can use it with almost any type of tile: ceramic, glass, limestone, marble, porcelain, slate and travertine. Contains built-in Microban® antimicrobial protection which inhibits the growth of bacteria and mould. Micromax 3 Eco offers a good working time of 30 minutes and will set in 2 to 3 hours (at 20°C) – drying time may be longer in cold temperatures or when your substrate is non-porous. We supply 1kg of grout powder in a sealed plastic carton. Mix up at a ratio of 5:1 powder to water (by weight). Ensure that your adhesive is completely dry, then clean all surfaces and work only in dry conditions at above 5°C. 1kg of grout powder should cover an area of 0.75m² but results will depend on your tile sizes and depths.
